Procom CXL 2400-1-... - Manual

CXL 2400-1/...
Unity Gain Base Station and Marine 2400 MHz Antenna for
Mounting on Threaded 1” Water pipe
DESCRIPTION
The CXL 2400-1/… is a 0 dBd, vertically polarized, omnidirectional rod-
type base station and marine antenna for the 2400 MHz band.
The 1” revolving nut mounting system is standard throughout the
marine sector, and several different mounting brackets are available,
making it possible to install the antenna either on the masthead using
FLG or SMR 2, side-mounted on the mast (SMR 1) or mounted on a
cross-beam (FLG). Also, the antenna can be mounted on deck or rooftop
by means of the FLG.
The higher the antenna is mounted, the better coverage. Avoid
mounting the antenna parallel to or in the neighbourhood of other metal
parts, such as masts, supporting wires etc., otherwise the SWR and the
radiation pattern may be strongly influenced.
A conical glass fibre tube completely encloses the carefully designed
radiating element to ensure long dependable service in all climates.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
CXL 2400-1/l 110000165 2300 – 2500 MHz
CXL 2400-1/m 110000164 2400 - 2600 MHz
CXL 2400-1/h 110000166 2500 – 2700 MHz
SPECIFICATIONS
ELECTRICAL
MODEL CXL 2400-1/...
ANTENNA TYPE ½ λ coaxial dipole, broad-banded
FREQUENCY Models within 2300 – 2700 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 2 dBi 0 dBd
BANDWIDTH ≥ 200 MHz @ SWR ≤ 2.0
SWR ≤ 2.0, typ. ≤ 1.5
MAX. POWER 100 W
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.006 m²
WIND LOAD Approx. 8 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Chromed brass
TOTAL HEIGHT Approx. 230 mm
DIA. IN TOP END 14 mm
DIA. IN BOTTOM END 16 mm
WEIGHT Approx. 180 g
MOUNTING On 1” RG (G1”-11) threaded water pipe or
on optional mounting brackets (see below)
ACCESSORIES (to be ordered separately)