Xoro HRT 1285 - Manual (Page 66)

14 HRT 1285
Engl
ish
Connection
You have the possibility to transmit the digital audio signal to a decoder or amplifier.
Therefore use the coaxial output.
1.
Switch off and unplug all devices
2. Connect the receiver and the TV with a SCART cable
3. Connect the HRT 1285 to the decoder or amplifier (coaxial clable)
4. Switch on all devices
5. Activate the coaxial inpout at your decoder or amplifier
Note:
•
The Cables are not part of the accessories
•
There a just a few channels which use digital audio.
•
You can gain information about the audio signal by pressing the AUDIO key on
your
remote control
Connecting an external audio decoder