Procom FSP 4-...-fme - Manual

FSP 4/...-FME
“StraightFlex” Antenna with Universal FME-Connection
System for Portable Equipment in the 4 m Band
DESCRIPTION
Highly flexible, polyethylene covered StraightFlex steel wire.
Shortened ¼ λ antenna whip yields an acceptable mechanical length.
Highest quality materials in an elegant and slender design.
Delivered factory tuned and tested to ensure minimum SWR and
optimum performance.
Provided with universal FME-connection system for optimum flexibility
and easily exchangeable connectors.
Designed for use with the following of Procoms line of black FME-
connectors (to be ordered separately): BFME-UHF, BFME-BNC, BFME-
TNC and BFME-N.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
FSP 4/l-FME 140000057 66 - 76 MHz
FSP 4/m-FME 140000058 72 - 82 MHz
FSP 4/h-FME 140000055 78 - 88 MHz
SPECIFICATIONS
ELECTRICAL
MODEL FSP 4/...-FME
ANTENNA TYPE Shortened ¼ λ antenna for portable equipment
FREQUENCY
4 m band covered by three models
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
BANDWIDTH
≥ 10 MHz @ SWR ≤ 3.0
SWR < 2 when mounted directly on portable equipment
MAX. POWER 25 W
MECHANICAL
MATERIALS Polyethylene covered flexible steel wire
Black-chromed brass
COLOUR Black
TOTAL HEIGHT 500 mm (dep. on type)
WEIGHT
Approx. 70 g
CONNECTOR FME (female) (Exchangeable BFME-connectors to be ordered
separately)
RECOMMENDED BFME-CONNECTORS
(To be ordered separately)
PLEASE NOTE
The FSP 4 is also available with different thread studs, but in this
case with fixed, non-exchangeable connector (not FME-connection
system). Information on these special versions on request.
PROCOM A/S reserve the right to amend specifications
without prior notice.
16/05/12