SCANTECH ID (Champtek company) IG300BT - Manual (Page 3)

3
5.6 Firmware Version ........................... 19
5.7 Set Cradle Interface Barcode ........ 20
5.8 Cradle RS232 Mode
Parameter
............................................... 20
5.8.1 Cradle Baud Rate ...................... 20
5.8.2 Cradle Data Bits .......................... 21
5.8.3 Cradle Stop bits .......................... 21
5.8.4 Cradle Parity ................................ 21
5.8 Decoding Selection ........................ 22
5.8.1 Symbologies Selection ............... 22
5.9 Disable All Symbologies. ............... 29
5.10 Multi Code .................................... 30
5.11 Activates user defined
symbology identifier (UDSI)
transmission for all symbologies.
.......... 30
5.12 Postambles ................................... 33
Appendixes ........................................ 34
A. Readable Symbologies ................. 34
B. Performance .................................. 35
C. Indicator LED Status ..................... 36
D. Electrical Characteristics .............. 37
E. Environmental ................................ 37
F. Scan Map ....................................... 37
G. Test Symbologies .......................... 38