Media-Tech WLAN REPEATER ECO - Manual (Page 7)

7
EN
Factory reset
Whenever you noticed strange behavior
of device or you have forgotten password
you can restore factory settings, simply put
straighten paper clip into reset hole for 10
seconds (device must be powered from elec-
tric outlet).
Troubleshooting regarding
Repeater Mode
Q: After configuration I can not enter man-
agement site 192.168.2.1
A: Set up manually IP address of your LAN or
WiFi network card in your computer as de-
scribed in this quick guide.
Q: After configuration I can enter manage-
ment site 192.168.2.1 but I do not have Inter-
net connection.
A: Set up manually IP address of your LAN or
WiFi network card according to address class
in your router or switch into auto-configura-
tion “obtain IP address automatically”, DHCP
function in your router will assign IP and for-
ward DNS address so you will access local and
Internet network.
Due to continuous development specifica-
tion and appearance of product are subject to
change without prior notice. For technical sup-
port please visit www.media-tech.eu.