Media-Tech MEGA DROIDER IR - Manual

named STB. There are three ways of setup: enter brand
code, automatic search, manual search. Additionally if
not all buttons are working you can use learn function
to setup buttons from original remote.
A. Set up by Brand Code
1. Switch on the device for which you wish to use the
remote control (for instance TV set).
2. Find the code number of your device brand in the
code list (for instance Lifetec 0050) from the relevant
device group (TV).
3. Press and hold the device button (for instance TV)
for three seconds. Release the device button as soon
as LED lights up, now it is in set up mode.
4. Enter the 4-digit device code (for instance 0050 for
Lifetec TV) within 10 seconds. If an entry is not made
within 10 seconds, the set- up mode is automatically
terminated.
5. The LED turns off if the remote accepts the code. If
the LED fl ashes two times, that means the code may
be wrong, and the remote control remains in set-up
mode, enter the correct code from the list again.
6. Check the function of the buttons on the remote
control. If it does not function correctly, try another
4-digit device code (for instance 0057…) from the
list under the same brand. Repeat steps 3 to 6 until
all the basic functions operate correctly.
Note! Exit the set-up mode by pressing the device
button, or the set-up mode is automatically termi-
nated if no button is pressed for 10 seconds.
B. Set up by Automatic Search
If setting up by brand name and codes is not success-
ful, or you can not fi nd your brand name in the code
list, you can use the Automatic Search function to fi nd
the correct code for your remote control.
1. Switch on the device that you like to control. If it is a
VCR, insert a cassette.
2. Point the remote control at your device. Press the
device button (for instance TV) for three seconds,
the LED turns on, keep pressing the device button
for about two seconds until the LED starts fl ashing,
that means it is in Automatic Search now and you
can release the device button.
3. The “Volume+” signal is automatically transmitted
from the remote control to the device (code scan).
As soon as the volume of the device (for instance
TV) changes, immediately press the device key to
stop the Automatic Search.
EN
MEGA DROIDER IR
User Manual
Wireless 3 in1 Pointing Device
MT1421
Introduction
This universal remote control can control up to two de-
vices, it can also be used with PC computer or Media-
Tech Multimedia Fan Center devices (via USB IR receiv-
er). Please read this manual before using the device.
Overview
Front
Rear
USB IR Receiver
Installing batteries
Using with PC computer/Media-Droid
Plug USB IR Receiver into PC computer or Media-
Droid. Device will be installed automatically, no ad-
ditional drivers are required. To use touchpad press it
once do wake it up, then slide fi ngers along to control
mouse movement. Press Lock Keypad button to dis-
able keyboard and mouse, press again to enable.
Remote control setup
Before using remote control you need to set it with
device (TV, DVD, STB or others). You can store two
devices, by default fi rst device is named TV, second is
LEARN
Power/LED
Second device STB
First device TV
Mini TouchPad
Enter Backspace Left click
Right click Lock keypad Capslock