QTech Data Systems People Counter System - Manual (Page 4)

1. INTRODUCTION
This document details the installation process for the QTech Q54 Data Logger module
packaged for use as a Foot Traffic / People Counter.
The Data Logger enclosure is of a robust steel construction made from 1.5mm mild steel
with a 3mm mounting plate, weighing some 1.8kg’s. This enclosure has been designed to
minimise vandalism and present a difficult enclosure for access. This unit is not deemed to
be waterproof and care should be taken if it is mounted in areas where high pressure water
cleaners are used.
The unit has a self contained PIR for monitoring movement (foot traffic / people counting),
mounting is important to deliver the best results.
The unit is battery powered, the Q54 Data Logger module is powered by two AA pen light
batteries, the Q54 will run for 12 months on this power source. Note that the Q54 battery
status is retrieved and displayed by the iPaq software. The PIR is powered by four D size
batteries, the PIR will operate for 9 – 12 months on this power source. Please note that the
batteries supplied by QTech are high capacity and have been provided specifically for the
purpose, using other capacity batteries may not deliver the same results in terms of life.
This document should be used in conjunction with the DATSCAN User Guide.
Q54 Data Logger – People Counter Enclosure