Dayton Audio EMM-6 Electret Measurement Microphone - Manual

• Precision condenser microphone for measurement and critical recording applications
• Perfect for use with room acoustic analyzers and audio measurement systems
• Extremely flat frequency response with very high resolution
• True omnidirectional pattern
• Works with phantom power from +15 V to +48 V
• Low noise FET input reduces low-frequency distortion
• Gold-plated XLR output connector for accurate signal transfer
• High-quality components and rugged construction
• Includes stand mount, foam windscreen, and transport case
• Each microphone includes its own unique calibration response graph
Technical Specifications:
• Capsule type: 6 mm electret condenser
• Polar pattern: omnidirectional
• Frequency response: 18 Hz - 20 kHz
• Impedance: 200 ohms between pins 2 and 3
• Sensitivity at 1 KHz into 1K ohm: 10mV/Pa (-40dBV, re. 0dB = 1V/Pa)
• Max. SPL for 1% THD @ 1000Hz: 127dB
• S/N ratio: 70 dB A-weighted
• Connector: gold plated XLR
• Phantom power: +15 V to +48 V
• Weight: 144 grams
EMM-6 Measurement Microphone
www.daytonaudio.com
IMEMM609A
© Dayton Audio ®
P.O. Box 52 • Springboro, OH • 45066-052 • Phone: (937) 743-8248
Typical Frequency Response