Controls – AEG X59143MD0 User Manual

Page 5

Advertising
background image

5

ENGLISH

CONTROLS

BUTTON DISPLAY

FUNCTIONS

A

Displays the set speed

Turns the suction motor on and off

B

Displays the set speed

Decreases the speed of the motor

V3 V2 V1

C

Displays the set speed

Increases the speed of the motor

V1 V2 V3

D

Displays

HI The spot

flashes

Starts maximum suction speed. After 5 minutes

the speed will return automatically to the one

set before. This function can be deactivated by

pressing the button again (the decimal point at the

centre of the display will flash).

E

Displays the time

remaining before the hood

turns off (countdown) and

the Set speed. The spot at

the bottom right flashes

Enables automatic delayed shutdown of the

appliance (Delay), with a delay that depends on

the working speed set.

Speed 1 delay 20 minutes

Speed 2 delay 15 minutes

Speed 3 delay 10 minutes

The proposed delay time can be changed by

pressing the button successively and selecting

one of the options available (5, 10, 15, 20, 25 and

30 minutes). At the end of the time selected the

appliance will turn off automatically. To deactivate

this function, simply press the button until the

option selected is 0 or turn the motor off.

F

Turns the hob lighting system on and off

Displays

F

Indicates the need to wash the metal grease filters.

The alarm is triggered after the Hood has been in

operation for 100 working hours. This indication is

only visible when the motor is turned off. To reset

the alarm:

Turn the motor off and press button

D for

approximately 3 seconds, until the display turns off.

Displays

C

Indicates the need to change the activated charcoal

filters, and also to wash the metal grease filters.

The alarm is triggered after the Hood has been

in operation for 200 working hours. This indication

is only visible when the motor is turned off. This

indication must be activated following the procedure

described in the section on maintenance of the

activated charcoal filter. To reset the alarm:

Turn the motor off and press button

D for

approximately 3 seconds, until the display turns off.

Advertising
This manual is related to the following products: