Hotpoint Ariston ECOT7D 1491 - Manual (Page 7)

GB
7
Wash cycles and functions
Wash functions
Prewash
If this function is selected, the pre-wash cycle will run; this is
useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
! It cannot be used with the
, , , , , , programmes.
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! It cannot be used in conjunction with the , Spin, Pump out,
programmes.
Easy iron
By selecting this function, the wash and spin cycles will be modified in
order to reduce the formation of creases. The wash cycles ends
with the laundry being left to soak in the machine; the EASY IRON
and START/PAUSE indicator lights will flash (orange) and the text
Table of wash cycles
“STOP WITH WATER” will appear on the display.
To drain the water so that the laundry may be removed, press
the START/PAUSE button or the EASY IRON button.
! It may not be used with the , , , programmes.
Fast wash
Reduces the duration of the wash cycle, while making it possible
to save water and electricity.
! It cannot be used with the , , , , programmes.
Eco Wash
The Eco Wash function saves energy by not heating the
water used to wash your laundry – an advantage both to the
environment and to your energy bill. Instead, intensified wash
action and water optimisation ensure great wash results in the
same average time of a standard cycle.
For the best washing
results we recommend the usage of a liquid detergent.
! It cannot be used with the Mix 15, , , , , programmes.
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle
duration
Prewash Wash
Fabric
softener
Everyday wash cycles (Daily)
Cotton: extremely soiled whites. 90° 1400    7 53 1,99 62 145’
Cotton Standard 60° (1) (1° press of the button): heavily soiled whites and
resistant colours.
60° 1400 -   7 53 1,17 57 195’
Cotton Standard 40° (2) (2° press of the button): lightly soiled whites and
delicate colours.
40° 1400 -   7 53 1,09 92 190’
Cotton Standard 20° (3° press of the button): lightly soiled whites and
delicate colours.
20° 1400 -   7 - - - 180’
Synthetics (1° press of the button): heavily soiled resistant colours. 60° 800    2,5 44 0,85 39 105’
Synthetics (3) (1° press of the button): lightly soiled resistant colours. 40° 800    2,5 44 0,53 39 95’
Synthetics (2° press of the button): lightly soiled whites and delicate colours. 40° 800    2,5 - - - 70’
Mix 30’ (1° press of the button): to refresh lightly soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
30° 800 -   3 71 0,25 33 30’
Mix 15’ (2° press of the button): to refresh lightly soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
30° 800 -   1,5 71 0,08 29 15’
Special cycles / Memory
M Memory: allows for any wash cycle to be stored.
Baby cycle: heavily soiled delicate colours. 40° 800 -   2 - - - 120’
Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -   1 - - - 55’
Wool: for wool, cashmere, etc. 40° 800 -   1 - - - 65’
Partial wash cycles
Spin (1° press of the button) - 1400 - - - 7 - - - 16’
Rinse (2° press of the button) - 1400 - -  7 - - - 36’
Pump out (3° press of the button) - 0 - - - 7 - - - 2’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle (1° press of the button) with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle
(2° press of the button) with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle (2° press of the button) with a temperature of 40°C.
3) Synthetic program along: set wash cycle (1° press of the button) with a temperature of 40°C.