GC EUROPE G-aenial Universal Flo - Manual (Page 18)

18 G-ænial Universal Flo Technical Manual
10.0 literature
1. characteristics in Polymerization Shrinkage of latest low-shrinkage Resin composite
Restoratives. T. Maseki, T. Nitta, M. Yamase, T. Yamada, S. Ogawa, T. Kimishima, Y. Nara and I.L.
Dogon. Abstract 457 – AADR 2010, Washington DC, USA
2. Wear resistance of new flowable composite resins. M. Nakayama, F. Fusejima, T. Kumagai and
T. Sakuma. Abstract 3271 – IADR 2009, Miami, USA
3. Mechanical Properties of Various latest Resin composite Restoratives. M. Yamase, T. Maseki, T.
Nitta, T. Kimishima and Y. Nara. Abstract 464 – AADR 2010, Washington DC, USA
4. Evaluation of Vickers Hardness and Surface Roughness of Composites. I. Okada, Y. Kumashiro,
D. Kita and A. Ishikawa. Abstract 2016 – IADR 2011, San Diego, USA
5. In vitro localized wear of current composite restoration materials. K.Tsubota, M. Miyazaki, W.W.
Barkmeier, M.A. Latta. Abstract 1188 – IADR 2011, San Diego, USA
6. Polish Retention of a Nanohybrid Flowable Composite. J.A. Platt, M. Macpherson and B.
Rhodes. Abstract 1175 – IADR 2011, San Diego, USA
7. early no interfacial-Gap incidence vs. Flexural Modulus with injectable composites. M. irie,
Y.Tamada, Y. Maruo, G. Nishigawa, M. Oka, S. Minagi, K.Suzuki and D.C. Watts. Abstract 3203
– IADR 2011, San-Diego, USA
8. Surface characteristic of new injectable composite resin. M. Wako, M. Nakayam, T. Kumagai and
T. Sakuma. Abstract 3287 – IADR 2011, San-Diego, USA
9. Volumetric Shrinkage and Mechanical Properties of injectable Resin composite. T. Takamizawa,
Y. Ogura, H. Kurokawa, S. Ando, M. Miyazaki and M.A. Latta. Abstract 605 – IADR 2011,
San-Diego, USA
11.0 Packaging
SHADES
A1, A2, A3, A3.5, A4, B1, B2, B3, C3, AO2, AO3, BW, CV, JE, AE
STORaGe
Store in a cool and dark place (4° c - 25° c / 39.2 °F - 77.0°F)
(Shelf life: 3 years from date of manufacture)
PACKAGES
1. Syringe 3.4 g (2.0 ml), 20 dispensing tips iii plastic, 1 light-protective cover
2. Dispensing tip III plastic: 30 dispensing tips, 2 light protective covers
3. Dispensing tip III Needle (metal): 30 dispensing tips, 2 light protective covers