9 dram timing configuration, Dram timing configuration -15, Chapter 3 – Asus M4A79 Deluxe User Manual

Page 75: Dram command rate [auto, Dram timing mode [auto, Dct0/dct1 strength config. [auto

Advertising
background image

ASUS M4A79 Deluxe

3-15

Chapter 3

DRAM Command Rate [Auto]

Configuration options: [Auto] [1T] [2T]

DRAM Timing Mode [Auto]

Configuration options: [Auto] [Both]

The following sub-items appear only when you set the DRAM Timing Mode item to [Both].

TCL [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only]
TRCD [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRTP [Auto]

Specifies the read CAS# to precharge time.

Configuration options: [Auto] [2-4 CLK] [3-5 CLK]
TRAS [Auto]

Configuration options: [Auto] [5 CLK] [6 CLK] – [17 CLK] [18 CLK]
TRC [Auto]

Configuration options: [Auto]
TWR [Auto]

Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRRD [Auto]

Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK]
TWTR [Auto]

Specifies the write to read delay when accessing the same DIMM.

Configuration options: [Auto] [1 CLK] [2 CLK] [3 CLK]
TRFC0/TRFC1 [Auto]

Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns]

DCT0/DCT1 Strength Config. [Auto]

Configuration options: [Auto] [DCT 0] [DCT 1] [Both]

3.5.9

DRAM Timing Configuration

Ai Tweaker

DRAM Timing Configuration

DRAM Command Rate

[Auto]

DRAM Timing Mode

[Auto]

DCT0/DCT1 Strength Config.

[Auto]

DRAM Command Rate:

1T: DRAM address and

control signals are

driven for one MEMCLK

cycle.

The configuration options for some of the following items vary depending on the DIMMs

you install on the motherboard.

Advertising