8 apm, 9 network stack configuration – Asus H81M2 User Manual

Page 59

Advertising
background image

2-30

Chapter 2: Getting started

2.6.8

APM

Restore AC Power Loss [Power Off]

[Power On]

The system goes into on state after an AC power loss.

[Power Off]

The system goes into off state after an AC power loss.

[Last State]

The system goes into either off or on state, whatever the system state was

before the AC power loss.

Power On By PCI-E/PCI [Disabled]

[Disabled]

Disables the PCI-E/PCI devices to generate a wake-on-LAN feature of the

Intel

®

/Realtek LAN device.

[Enabled]

Enables the PCI-E/PCI devices to generate a wake-on-LAN feature of the

Intel

®

/Realtek LAN device.

Power On By Ring [Disabled]

[Disabled]

Disables Ring to generate a wake event.

[Enabled]

Enables Ring to generate a wake event.

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to [Enabled], the items RTC Alarm Date (Days) and Hour/

Minute/Second will become user-configurable with set values.

2.6.9

Network Stack Configuration

Network Stack [Disabled]

This item allows user to disable or enable the UEFI network stack. Configuration options:

[Disabled] [Enabled]

The following two items appear only when you set the previous item to [Enabled].

Ipv4 PXE Support [Enabled]

This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options:

[Disabled] [Enabled]

Ipv6 PXE Support [Enabled]

This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options:

[Disabled] [Enabled]

Advertising