Asus L7 - Manual (Page 34)

34
In the case where a specific control does not exist (e.g. no default button) The cursor remains in it’s
current position. The user can however select multiple locations and in this case a priority system is
used. For example, if default push button and system menu box are selected and a window which
contains no default push button is opened then the cursor jumps to the system menu box if it is
present. If not, the cursor remains in it’s current location. The dialog bitmap to the right of the check
boxes show the location of the current auto Jumps and their associated priorities - one being the
highest, three being the lowest.
NOTE: This feature only moves a cursor to specific position; it does not make click event. This
feature may not work on some application.
Tapping
Use this feature to adjust the tap settings.
NOTE: Tapping tab appears only when a Touchpad having tapping setup functions is used. When
the Tapping property sheet is not displayed, this function cannot be used with your pointing device.
Orientation (Cont’)