Asus P5QL-E - Manual (Page 46)

2-22 Chapter 2: Hardware information
3. USB device wake-up (3-pin USBPW1-4, PS2_USBPW56, USBPW7-10,
USBPW1112)
Set these jumpers to +5V to wake up the computer from S1 sleep mode
(CPU stopped, DRAM refreshed, system running in low power mode) using
the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep
modes.
The USBPW1-4/PS2_USBPW56 jumpers are for the rear USB ports. The
USBPW7-10/USBPW1112 jumpers are for the internal USB connectors that
you can connect to additional USB ports.
• The USB device wake-up feature requires a power supply that can provide
500mA on the +5VSB lead for each USB port; otherwise, the system will
not power up.
• The total current consumed must NOT exceed the power supply capability
(+5VSB) whether under normal condition or in sleep mode.
P5QL-E
P5QL-E USB device wake-up
2 1 2 3
+5V
(Default)
+5VSB
USBPW7-10
USBPW1112
2 1 2 3
+5V
(Default)
+5VSB
PS2_USBPW56
1
2
1
2
+5V
(Default)
+5VSB
USBPW1-4