Asus P8H77-V - Manual (Page 38)

2-20 Chapter 2: Hardware information
Chapter 2
2. Intel ® H77 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1~4 [blue])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc
drives via Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel ® Rapid Storage Technology through the onboard Intel ® H77
chipset.
• These connectors are set to [IDE] by default. If you intend to create a Serial ATA RAID
set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID].
Refer to section 3.5.3 SATA Configuration for details.
• Before creating a RAID set, refer to section 4.4 RAID configurations or the manual
bundled in the motherboard support DVD.
• When using NCQ, set the SATA Mode Selection in the BIOS to [AHCI]. Refer to
section 3.5.3 SATA Configuration for details.
• You must install Windows ® XP Service Pack 3 or later versions before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows ® XP SP3 or later versions.
P8H77-V
P8H77-V Intel ® SATA 3.0Gb/s connectors
SATA3G_4
G
N
D
R
SATA_R
XP
4
R
SATA_R
XN
4
G
N
D
R
SATA_T
X
N
4
R
SATA_T
X
P
4
G
N
D
SATA3G_3
G
N
D
R
SA
TA_T
X
P
3
R
SA
T
A_TXN3
G
N
D
R
SATA
_R
XN
3
R
S
A
TA
_R
X
P
3
G
N
D
SATA3G_2
G
N
D
R
SATA_T
X
P
2
R
SA
T
A_TXN2
G
N
D
R
SATA
_R
XN
2
R
S
A
TA
_R
X
P
2
G
N
D
SATA3G_1
G
N
D
R
SATA_T
X
P
1
R
SA
T
A_TXN1
G
N
D
R
SA
TA_R
XN
1
R
S
A
TA
_R
X
P
1
G
N
D