Asus P8P67 WS Revolution User Manual

Page 45

Advertising

3. Marvell

Serial ATA 6.0 Gb/s connectors

(7-pin SATA6G_E1/E2 [navy blue])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.

•

These connectors are set to [AHCI] by default.

•

You must install Windows

XP Service Pack 3 or later versions before using

Serial ATA hard disk drives.

•

Before creating a RAID set, refer to section

4.4.5 RAID configurations or

the manual bundled in the motherboard support DVD.

•

When using hot-plug and NCQ, set the Marvell Controller item in the BIOS
to [AHCI Mode]. Refer to section

�.5.6 Onboard Devices Configuration

for details.

ASUS P8P67 WS Revolution

2-19

Advertising