Appendix 1: glossary – Asus Xonar Essence STX User Manual

Page 9

Advertising
background image

9

ASUS Xonar Essence STX Audio Precision Test Report

Appendix 1: Glossary

•

Noise Level

The level of any undesired system noise signals over the audio spectrum, including AC mains
hum, white noises, stray magnetic field, etc.

•

SNR

Signal-to-Noise Ratio, the ratio of the maximum amplitude signal to the sum of the noise
energy. The higher, the better.

•

THD+N

Total Harmonic Distortion plus Noise, measured by attenuating the fundamental signal with a
narrow band notch filter, then measuring the remaining signal which consists of harmonics of
various order. This implies the linearity of the audio converter and the lower, the better.

•

Frequency Response

A measure of a device's ability to respond to a fixed input voltage, at different input
frequencies, and the difference in amplitude reproduced for each frequency. The flatter curve
at wider frequency range is better.

•

Dynamic Range

The difference, usually expressed in dB, between the highest and lowest amplitude portions of
a signal which a device can linearly handle. Ideally it should be very close to SNR value and
the higher, the better.

•

Crosstalk

Unwanted signal coupling from another channel of stereo or multi-channel transmission. The
lower value is better.

Advertising