Asus P4S533-E - Manual (Page 53)

ASUS P4S533-E motherboard user guide 41
P4S533-E
®
P4S533-E LINE_IN Connector
ALIN1
GND
BLINE_LIN_R ALINE_LIN_R
BLINE_IN_L ALINE_IN_L
1
P4S533-E
®
P4S533-E ALOUT Connector
ALOUT1
1
ALOUT1_LOUT_L BLOUT1_LOUT_R ALOUT1_LOUT_R BLOUT1_LOUT_L
21. Audio Line-out Selector jumpers (4 pin ALOUT1)
By default, these jumpers are shorted (jumpers on) to route the signal from
the audio controller to the rear panel Line Out jack to make it available for
audio out devices such as speakers or a headphone. If you connect the Intel
Front Panel audio cable to the IAPANEL connector (see next page), then
remove the caps from these two jumpers to permit automatic switching of
audio signals between the rear panel Line Out jack and the Intel audio cable.
20. Audio line-in header (LINE_IN)
This connector supports audio input on left and right stereo audio channels.
NOTE: The motherboard ships with Jumper caps over pins 1-2 and 4-5.
Remove them only when making audio input connections.