Asus P5P800 - Manual (Page 79)

A S U S P 5 P 8 0 0 A S U S P 5 P 8 0 0 A S U S P 5 P 8 0 0 A S U S P 5 P 8 0 0 A S U S P 5 P 8 0 0 4 - 2 1 4 - 2 1 4 - 2 1 4 - 2 1 4 - 2 1
4.4.2 4.4.2 4.4.2 4.4.2 4.4.2 CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure Advanced CPU settings
Manufacturer: Intel
Brand String: Genuine Intel(R) CPU 3.20GHz
Frequency : 2800 MHz
FSB Speed : 800 MHz
Cache L1 : 16 KB
Cache L2 : 1024 KB
Cache L3 : 0 KB
Ratio Status: Unlocked
Ratio Actual Value : 14
CPU Ratio [ 14]
VID CMOS Setting: [ 45]
Microcode Updation [Enabled]
Max CPUID Value Limit: [Disabled]
Enhanced C1 Control [Auto]
CPU Internal Thermal Control [Auto]
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
CPU Ratio [ 14] CPU Ratio [ 14] CPU Ratio [ 14] CPU Ratio [ 14] CPU Ratio [ 14]
Sets the ratio between the CPU Core Clock and the Front Side Bus
frequency. The default value of this item is auto-detected by the BIOS. Use
the <+> or <-> keys to adjust the values.
VID CMOS Setting [ 45] VID CMOS Setting [ 45] VID CMOS Setting [ 45] VID CMOS Setting [ 45] VID CMOS Setting [ 45]
Allows you to set the VID CMOS setting at which the processor is to run.
The default value of this item is auto-detected by the BIOS. Use the <+> or
<-> keys to adjust the values.
Microcode Updation [Enabled] Microcode Updation [Enabled] Microcode Updation [Enabled] Microcode Updation [Enabled] Microcode Updation [Enabled]
Disables or enables the microcode updation.
Configuration options: [Disabled] [Enabled]
Max CPUID Value Limit [Disabled] Max CPUID Value Limit [Disabled] Max CPUID Value Limit [Disabled] Max CPUID Value Limit [Disabled] Max CPUID Value Limit [Disabled]
Enable this item to boot legacy operating systems that cannot support
CPUs with extended CPUID functions.
Configuration options: [Disabled] [Enabled]
Enhanced C1 Control [Auto] Enhanced C1 Control [Auto] Enhanced C1 Control [Auto] Enhanced C1 Control [Auto] Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s capability
to enable the C1E support. In C1E mode, the CPU power consumption is
lower when idle. Configuration options: [Auto] [Disabled]
F10 Save and Exit
ESC Exit
Hyper Threading Technology [Enabled]