Asus PB238Q - Manual (Page 15)

2-3 ASUS LCD Monitor PB238Q Series
2.3 Connecting the cables
Connect the cables as the following instructions:
• To connect the power cord: Connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power outlet.
• To connect the VGA/HDMI/DVI/DisplayPort cable:
a. Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s VGA/
HDMI/DVI/DisplayPort jack.
b. Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your
computer’s VGA/HDMI/DVI/DisplayPort jack.
c. Tighten the two screws to secure the VGA/DVI connector.
• To connect the audio cable: Plug one end of the audio cable to the
monitor’s Audio Line-in Port. Connect the other end of the audio cable to your
computer’s audio Port.
• To use the USB ports: Plug the smaller end (type B) of the USB
upstream cable to the monitor’s USB upstream port, and the larger end
(type A) to your computer’s USB port.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.