Asus AT4NM10-I - Manual (Page 11)

ASUS AT4NM10-I 1-2
1.2.2 Layout contents
1.2 Motherboard overview
1.2.1 Motherboard layout
Place four screws into the holes indicated by circles to secure the motherboard to the
chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
Ensure that you install the motherboard into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis.
Place this side towards
the rear of the chassis. Atom D410
AT4NM10-
I
Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page
1.
Keyboard/mouse power and USB device
wake-up (3-pin PS2_USBPW1-4, 3-pin USBPW5-
8)
1-10 9.
Chassis intrusion connector (4-1 pin
CHASSIS)
1-14
2. Serial port connector (10-1 pin COM2) 1-17 10. Internal speaker connector (4-pin
SPEAKER)
1-14
3. ATX power connectors (24-pin EATXPWR, 4-pin
ATX12V)
1-12 11. Clear RTC RAM (3-pin CLRTC) 1-9
4. CPU and chassis fan connectors (3-pin
CPU_FAN, 3-pin CHA_FAN)
1-15 12. Onboard LED 1-1
5. LVDS connector (30-pin CON1) 1-16 13. Serial ATA connectors (7-pin SATA1, SATA2) 1-13
6. Intel ® Atom™ D410 processor 1-15 14. USB connectors (10-1 pin USB56, USB78) 1-13
7. DDR2 DIMM sockets 1-3 15. Digital audio connector (4-1 pin SPDIF_OUT) 1-17
8. System panel connector (10-1 pin F_PANEL) 1-16 16. Front panel audio connector (10-1 pin AAFP) 1-15