Asus P8P67 LE - Manual (Page 50)

ASUS P8P67 LE 1-38
1.12 Onboard LEDs
1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
2. DRAM LED
DRAM LED checks the DRAM in sequence during motherboard booting process. If an
error is found , the LED next to the error device will continue lighting until the problem
is solved. This user-friendly design provides an intuitional way to locate the root
problem within a second.
3. TPU LED
The TPU LED lights when the TPU switch is turned to Enable.
P8P67 LE
P8P67 LE TPU LED
O2LED1
P8P67 LE SB_PWR
ON
Standby Power Powered Off
OFF
P8P67 LE Onboard LED
P8P67 LE
P8P67 LE DRAM LED
DRAM LED