Asus TUEP2-M - Manual (Page 20)

20
3. HARDWARE SETUP
ASUS TUEP2-M User’s Manual
Motherboard Settings
3. H/W SETUP
4) Onboard Audio CODEC Setting (AUD_EN1)
(available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jumpers.
Disable the onboard audio CODEC if you are using a PCI audio card on any of
the expansion slots or a primary audio/modem CNR on a CNR slot (see CNR
Slot later in this section). If using a PCI audio expansion card, Onboard AC97
Audio Controller in 4.4.2 I/O Device Configuration must also be disabled.
Setting AUD_EN1
Enable [1-2] (default)
Disable [2-3]
5) Onboard LAN Setting (LAN_EN)
The onboard LAN may be enabled/disabled with this jumper.
Setting
LAN_EN
Enable [1-2] (default)
Disable [2-3]
TUEP2-M
®
TUEP2-M Audio Codec Setting
AUD_EN1
Enable
(Default)
1 2
Disable
2 3
TUEP2-M
®
TUEP2-M On Board Lan Setting
Enable
(default)
Disable
1 2 2 3
LAN_EN