Asus P7P55D EVO - Manual (Page 96)

3-34 Chapter 3: BIOS setup
Chapter 3
Changed Mode
This item appears only when you select a Drive Xpert mode to update and displays the
Drive Xpert mode that you have changed.
Ultra Space
This item appears only when you have created a drive partition using the Ultra Space
function.
Drive Xpert Mode Update:
Update To Super Speed [Press Enter]
Allows you to use the Super Speed function that combines two hard drives as one
single drive partition.
All original data of the two hard drives will be erased for Super Speed setup.
Update To EZ Backup [Press Enter]
Allows you to use the EZ Backup function that copies and maintains an identical
image of data from the SATA_E1 (gray) drive to the SATA_E2 (drak blue) drive.
All original data of the SATA_E2 (dark blue) hard disk will be erased for EZ Backup setup.
Update To Normal Mode [Press Enter]
Allows you to use the SATA_E1 (gray) and SATA_E2 (dark blue) connectors as normal
SATA connectors.
When using only one hard disk in Normal Mode, connect the hard disk to the SATA_E1
(gray) connector on the motherboard.
Create Ultra Space [Press Enter]
This item appears only when you created a Super Speed or a EZ Backup set using
two hard drives with different capacity and allows you to create a single drive
partition using all the drive space unused by Drive Xpert.
Delete Ultra Space [Press Enter]
This item appears only when you have created a drive partition using the Ultra Space
function. All data stored in the Ultra Space partition will be erased.
Drive Xpert Device(s) List:
SATA_E1 (Gray) / SATA_E2 (Dark Blue)
Press <Enter> to display the information of the hard disks which are connected to the
SATA_E1 (gray) and SATA_E2 (dark blue) connectors on the motherboard.