Asus H87-PLUS - Manual (Page 66)

3-14 Chapter 3: BIOS setup
Chapter 3
Dec_WRD
Configuration options: [Auto] [0] [1]
tRDWR [Auto]
Configuration options: [Auto] [1] – [31]
tRDWR_dr [Auto]
Configuration options: [Auto] [1] – [31]
tRDWR_dd [Auto]
Configuration options: [Auto] [1] – [31]
MISC
MRC Fast Boot [Auto]
Allows you to enable, disable or automatically set the MRC fast boot. Configuration
options: [Auto] [Enable] [Disable]
DRAM CLK Period [Auto]
Configuration options: [Auto] [1] – [14]
Channel A/B DIMM Control [Enable Bot...]
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Scrambler Setting [Optimized ...]
Allows you to set the optimized scrambler setting for stability. Configuration options:
[Optimized (ASUS] [Default (MRC)]
DIGI+ VRM
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel VRM specification and affects CPU voltage. The CPU
working voltage will decrease proportionally to CPU loading. Higher load-line
calibration could get higher voltage and good overclocking performance, but increases
the CPU and VRM thermal conditions. This item allows you to adjust the voltage range
from the following percentages to boost the system performance: 0% (Regular), 25%
(Medium), 50% (High), 75% (Ultra High), and 100% (Extreme). Configuration options:
[Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specification.
CPU Fixed Frequency [XXX]
This item allows you to set a fixed CPU voltage frequency. Use the <+> or <-> keys to
adjust the value. The values range from 200kHz to 350kHz with a 50kHz interval.