Entering the nvidia, Raid utility – Asus P5N-D User Manual
Page 143
ASUS P5N-D
5-31
•
For detailed descriptions on the NVIDIA
®
RAID configuration, refer to the
“NVIDIA
®
RAID User Guide” found in your motherboard Support CD.
•
When using Windows
®
XP operating system, make sure to install the
Windows
®
XP Service Pack 2 or later versions..
Make sure to re-enter your NVRAID settings after the CMOS is cleared;
otherwise, the system will not recognize your RAID setup.
Entering the NVIDIA
®
RAID utility
To enter the NVIDIA
®
RAID utility:
1. Boot up your computer.
2.
During POST, press <F10> to display the main menu of the utility.
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
[F6] Back [F7] Finish [TAB] Navigate [���] Select [ENTER] Popup
At the bottom of the screen are the navigation keys. These keys allow you to move
through and select menu options.
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode:
Striping
Striping Block:
Optimal
Free Disks
Array Disks
Loc Disk Model Name
Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX
[�] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[�] Del