Asus VX248N - Manual (Page 18)

2-2 Chapter 2: Setup
2.3 Connecting the cables
1. Connect the cables as the following instructions:
VX248H
VX248N
VGA
DVI
HDMI
Earphone jack
Audio-in
•. To.connect.the.power.cord:
a. Connect the power adapter securely to the monitor’s DC input port.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
•. To.connect.the.VGA/DVI/HDMI.cable:
a. Plug one end of the VGA/DVI/HDMI/HDMI-DVI cable to the monitor’s
VGA/DVI/HDMI port.
b. Connect the other end of the VGA/DVI/HDMI/HDMI-DVI cable to your
computer’s VGA/DVI/HDMI port.
c. Tighten the two screws to secure the VGA/DVI connector.
•. To.connect.the.audio.cable:.connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
•. To.use.the.earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.4 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.