Asus X32VM - Manual (Page 77)

Notebook PC User Manual A-5
Security Setting
To set the password:
1. On the Security screen, select Administrator Password or User
Password.
2. Type in a password and press [Enter].
3. Re-type to confirm the password and press [Enter].
4. Password is then set.
To clear the password:
1. On the Security screen, select Administrator Password or User
Password.
2. Enter the current password and press [Enter].
3. Leave the Create New Password field blank and press [Enter].
4. Leave the Confirm New Password field blank and press [Enter].
5. Password is then cleared.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Boot
Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
this only access to Setup and is only asked for when entering Setup.
If ONLY the user’s password is set, this is a power on password and must
be entered to boot or enter Setup.
In Setup, the User will have Administrator rights.
Administrator Password Status NOT INSTALLED
User Password Status NOT INSTALLED
Administrator Password
User Password
HDD Password Status : NOT INSTALLED
Set Master Password
Set User Password
I/O Interface Security
Set Administrator Password
The password length must be in
the following range:
Minimum length 3
Maximum length 20
: Select Screen
: Select Item
Enter : Select
+/— : Change Opt.
F1
: General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit