Braun 5180 Silk-épil 5, Legs - Manual (Page 11)

12
pleasant epilation session. It ensures
maximum skin contact at the optimum
usage position thus enabling more
effective hair removal.
1 Make sure one of the attachments A
or a is attached to the epilation head.
To turn on the appliance, slide switch
4 to the «optimal» setting. For reduced
speed, choose the «soft» setting. The
«smartlight» illuminates as long as the
appliance is switched on.
2 Rub your skin to lift short hairs.
For optimum performance hold the
appliance at a right angle (90°) against
your skin. Guide it in a slow, contin-
uous movement without pressure
against the hair growth, in the direction
of the switch. As hair can grow in
different directions, it may also be
helpful to guide the appliance in dif-
ferent directions to achieve optimum
results.
The massaging rollers A should
always be kept in contact with the
skin, allowing the pulsating movements
to stimulate and relax the skin for a
gentler epilation. If you are used to
epilation and look for a faster way
to efficiently remove hair, attach the
EfficiencyPro cap
a . It allows maxi-
mum skin contact and ensures an
optimum usage position.
3 Leg epilation
Epilate your legs from the lower leg
in an upward direction. When epilating
behind the knee, keep the leg stretch-
ed out straight.
4 Underarm and bikini line epilation
Please be aware that especially at the
beginning these areas are particularly
sensitive to pain. Therefore, we
recommend that you select speed
setting «soft» for the first few epilation
processes. With repeated usage the
pain sensation will diminish. For more
comfort, ensure that the hair is at the
optimum length of 2–5 mm.
Before epilating, thoroughly clean the
respective area to remove residue
(like deodorant). Then carefully dab
dry with a towel. When epilating the
underarm, keep your arm raised up so
that the skin is stretched and guide the
appliance in different directions.
As skin may be more sensitive directly
after epilation, avoid using irritating
substances such as deodorants with
alcohol.
Cleaning the epilation head
5 After epilating, unplug the appliance
and clean the epilation head:
If you have used one of the attach-
ments
A or a , first remove it and
clean it with the brush.
6 To clean the tweezer element, use the
cleaning brush dipped into alcohol.
Clean the tweezers with the brush
from the rear side of the epilation
head while turning the barrel manually.
After cleaning, place your preferred
attachment back on the epilation
head.
Subject to change without notice.
This product conforms to the
European Directives EMC
2004/108/EC and Low Voltage
2006/95/EC.
Please do not dispose of the
product in the household waste
at the end of its useful life.
Disposal can take place at a
Braun Service Centre or at
appropriate collection points provided
in your country.
99388100_SE5270_S6-56.indd 12 99388100_SE5270_S6-56.indd 12 15.10.2009 14:50:07 Uhr 15.10.2009 14:50:07 Uhr