Asus M4A785TD-V EVO/U3S6 - Manual (Page 57)

ASUS M4A785TD-V EVO 2-15
Plug and Play O/S [No]
When this item is set to [No], BIOS configures all the devices in the system. When this item
is set to [Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes]
2.4.6 USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press <Enter> to display the configuration options.
Take caution when changing the settings of the PCI PnP menu items. Incorrect field values
can cause the system to malfunction.
HDAudio Controller [Enabled]
Enables or disables the high definition audio controller. Configuration options: [Enabled]
[Disabled]
Front Panel Select [HD Audio]
Allows you to set the HD audio mode. Configuration options: [AC97] [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Allows you to set the SPDIF_OUT mode. Configuration options: [HDMI Output] [SPDIF
Output]
Onboard LAN Controller [Enabled]
Allows you to enable or disable the Onboard LAN. Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the Onboard LAN Boot ROM. Configuration options:
[Enabled] [Disabled]
1394 Controller [Enabled]
Allows you to enable or disable the onboard 1394 device support. Configuration options:
[Enabled] [Disabled]
2.4.5 PCIPnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA
devices, and setting the memory size block for legacy ISA devices.
The Module Version and USB Devices Enabled items show the auto-detected values. If no
USB device is detected, the item shows None.
USB Functions [Enabled]
Allows you to enable or disable the USB functions. Configuration options: [Disabled]
[Enabled]
USB 2.0 Controller [Enabled]
Enables or disables USB 2.0 Controllers. Configuration options: [Disabled] [Enabled]