2 connecting cables, 3 detaching the base and stand, Connecting cables -2 – Asus PB298Q User Manual
Page 13: Detaching the base and stand -2
Advertising
2-2
ASUS LCD Monitor PB298Q
2.2
Connecting cables
Connect the cables you need based on the introductions on chapter 1.3.2,
page 1-4.
2.3
Detaching the base and stand
To detach the base and stand:
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your fingers to loosen the screw that lock the the base.
3. Detach the base from the stand.
4. Loosen 4 screws that locked the stand.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the base while removing the screw.
1
3
2
4
Advertising