Asus P4S533 - Manual (Page 39)

ASUS P4S533 motherboard user guide 27
4. DDR Voltage Setting (4 pin DDRVOL1)
This jumper controls the voltage output to the DDR memory DRAMS.
Setting VDDR
2.9V [3-4]
2.7V [2-3]
2.5V [1-2] (default)
P4S533
®
P4S533 DDRVOL Setting
DDRVOL1
2.5V 2.7V
1 2 2 3
2.9V
3 4
(Default)
P4S533
®
P4S533 Bass Center Setting
(CENTER/BASS) (BASS/CENTER)
BCS1
BCS2
(Default)
1 2 2 3
BCS1
BCS2
5. Bass Center Setting (2x3 pin BCS1, BCS2)
Use these jumpers in conjunction with the C-Media PCI Audio Driver and to
adjust output for 4 or 6 speaker audio. No audio standard exists for the three
pick-up surfaces on male audio jacks, therefore it may be necessary to switch
jumpers from the default position, Bass/Center, to Center/Bass, in order to
reroute signals among the internal leads of the Line-In, Line-Out, Mic female
sockets. Make sure a test is made using the Audio Driver software setup
available on the Support CD.
CAUTION! It is advisable not to increase the voltage excessively to
prevent the memory system from being exposed to undue strain.