Asus MEL-C - Manual (Page 15)

ASUS MEL-C User’s Manual 15
III. HARDWARE SETUP
III. H/W SETUP
Motherboard Settings
Motherboard Feature Settings (DIP Switches)
The motherboard’s onboard features can be adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.
MEL-C DIP Switch
OFF
ON 123456789
1
0
ON
<Frequency Selector
<Frequency Selector
<Frequency Selector
<Reserved
<Onboard Audio Setting
<VIO Setting
<Frequency Multiple Selector
<Frequency Multiple Selector
<Frequency Multiple Selector
<Frequency Multiple Selector
2. Onboard Audio Setting (DIP5)
The onboard audio can be turned ON or OFF using DIP5.
MEL-C Audio Setting
ON 1234
5
6789
1
0
Disable
ON 1234
5
6789
1
0
Enable
3. VIO Setting (DIP6)
The onboard voltage regulator allows you to select the voltage supplied to the
DRAM, chipset, AGP, and the CPU’s I/O buffer.
IMPORTANT! Setting this
jumper to Add 0.1 Volt may cause your system to become unstable. It is strongly
recommended that you leave this jumper on its default setting of Normal (3.5V).
ON 12345
6
789
1
0
ON 12345
6
789
1
0
MEL-C VIO Setting
Normal Add 0.1Volt