Asus M52V - Manual (Page 63)

Appendix
A
A-9
System BIOS Settings (cont.)
RAID Function Support (on selected model)
For models support RAID function, you must set the RAID item in the BIOS Setup before you can
create a RAID set from the built-in hard disk drives.
WARNING! Building a RAID set will clear all your data on both the primary disk
drive and the secondary disk drive. Ensure that you’ve made a backup before creat-
ing a RAID set.
The recovery partition will be deleted after you create a RAID set. You can only
install the system OS with the recovery DVD or a retail OS disc.
Only models with two disk drives may support this RAID function.
To enable the RAID function
1� Press <F2> to enter the BIOS Setup during POST�
2� Go to the Advanced menu�
Intel(R) Matrix Storage Manager option ROM v7.0.0.1020 ICH8M-E
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HTS72202 02DP0410DTG564WP 186.3GB Non-RAID Disk
1 Hitachi HTS72202 02DP1400DEG1XRGN 186.3GB Non-RAID Disk
Press <Ctrl-I> or Enter to Configuration Utility..
3� Set SATA Operation Mode to [RAID]�
4. Press <F10> to save the configuration and exit the
BIOS setup�
To build a RAID set
1� Restart the system and press <ESC> on bootup�
2� Press <Ctrl> + <I> to start the RAID utitliy�
Intel(R) Matrix Storage Manager option ROM v7.0.0.1020 ICH8M-E
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
1. Create RAID Volume 3. Reset Disks to Non-RAID
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HTS72202 02DP0410DTG564WP 186.3GB Non-RAID Disk
1 Hitachi HTS72202 02DP1400DEG1XRGN 186.3GB Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
2. Delete RAID Volume 4. Recovery Volume Options
5. Exit
3� Select a desired RAID set to create�
4� Restart the system and reinstall the system OS�