Asus TX97-XE - Manual (Page 66)

66 ASUS Audio User’s Manual
W
in3.x Audio
Drivers
Audio Installation
Win3.x Audio Drivers
You will be prompted that an addition will be made in your C:\AUTOEXEC.BAT
and C:\CONFIG.SYS files. The typical PC will have these settings added to the
system files:
C:\AUTOEXEC.BAT
SET BLASTER=A220 I5 D1 H5 P330 T6
SET SOUND=C:\VIBRA16
SET MIDI=SYNTH:1 MAP:E
C:\VIBRA16\DIAGNOSE /S /W=C:\WINDOWS
C:\VIBRA16\MIXERSET /P /Q
C:\CONFIG.SYS
FILES=40 (If less than 40 or does not exist)
If you wish to use the “Play” and “Record” utility located in \VIBRA16\ directory in
DOS mode, you must also add the following two lines through “Custom Installation.”
D EVICE=C:\VIBRA16\DRV\VIBRA16.SYS /UNIT=0 /BLASTER=A:220 I:5 D:1 H:5
DEVICE=C:\VIBRA16\DRV\CTMMSYS.SYS