Asus P7F7-E WS Supercomputer - Manual (Page 28)

DO NOT overtighten the screws! Doing so can damage the motherboard.
2.2.3 Placement direction
When installing the motherboard, ensure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.
2.2.4 Screw holes
Place nine (9) screws into the holes indicated by circles to secure the motherboard
to the chassis.
Place this side towards
the rear of the chassis
2-4 Chapter 2: Hardware information