Asus H81T - Manual (Page 53)

ASUS H81T 2-25
Intel ® Rapid Start Technology
Intel ® Rapid Start Technology [Disabled]
Allows you to enable or disable Intel ® Rapid Start Technology. Configuration options:
[Enabled] [Disabled]
The following items appear only when you set the Intel ® Rapid Start Technology to
[Enabled].
Entry on S3 RTC Wake [Enabled]
The system automatically wakes up and set to Rapid Start Technology S4
mode. Configuration options: [Enabled] [Disabled
Entry After [x]
Allows you to set the wake-up time.The values range from 0 (immediately)
to 120.
Active Page Threshold Support [Enabled]
The system automatically set itself to sleep when the partition size is
not enough for Rapid Start Technology to work. Configuration options:
[Enabled] [Disabled]
Active Memory Threshold [0]
Key in the value for the additional partition size for Rapid Start Technology
to work.
Ensure that the caching partition size is larger than the total memory size.
Hybrid Hard Disk Support [Disabled]
Allows you to enable or disable hybrid hard disk support. Configuration
options: [Enabled] [Disabled]
Intel ® Smart Connect Technology [Disabled]
ICST Configuration [Disabled]
Allows you to enable or disable the ISCT configuration. Configuration options:
[Enabled] [Disabled]
DeepSx Power Policies [Disabled]
Allows you to configure the DeepSx Mode. Configuration options: [Disabled] [Enabled in S5]
[Enabled in S4-S5].
2.6.4 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Mode Selection [AHCI]
Allows you to set the SATA configuration.
[Disabled]
Disables the SATA function.
[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.