Asus P4RD1-MX - Manual (Page 63)

ASUS P4RD1-MX 2-23
DRAM 1T/2T Command [2T]
Configure DRAM Timing by SPD [Enabled]
DRAM CAS Select [2.5 Clocks]
DRAM tRP Select [3.0 Clocks]
DRAM tRCD Select [3.0 Clocks]
DRAM tRAS Select [7.0 Clocks]
Refresh Rate Select [7.8 us]
DRAM 1T/2T Command [2T]
Sets the DRAM 1T/2T command. Configuration options: [1T] [2T]
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect). When disabled, you can manually
set the DRAM timing parameters through the DRAM sub-tems. The following
sub-items appear when this item is Disabled.
Configuration options: [Disabled] [Enabled]
DRAM CAS Select [2.5 Clocks]
Controls the latency between the SDRAM read command and the time
the data actually becomes available.
Configuration options: [1.0 Clocks] [1.5 Clocks] [2.0 Clocks]
[2.5 Clocks] [3.0 Clocks] [3.5 Clocks]
DRAM tRP Select [3.0 Clocks]
Sets the DRAM tRP.
Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks] [5.0 Clocks]
DRAM tRCD Select [3.0 Clocks]
Sets the DRAM tRCD.
Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks]
DRAM tRAS Select [7.0 Clocks]
Sets the RAS Activate timing to Precharge timing.
Configuration options: [1.0 Clocks] [2.0 Clocks] ~ [15.0 Clocks]
Refresh Rate Select [7.8 us]
Sets the refresh rate select.
Configuration options: [15.625 us] [3.9 us] [7.8 us] [31.3 us]
[62.5 us] [125 us]
Advanced NB
The Advanced NorthBridge configuration submenu allows you to change
advanced NorthBridge settings. Select an item then press <Enter> to
display the sub-menu items.