Asus P2V-B - Manual (Page 15)

ASUS P2V-B User’s Manual 15
III. HARDWARE SETUP
2. Voltage Input/Output Selection (VIO)
This jumper allows you to select the voltage supplied to the DRAM, chipset,
AGP, and the CPU’s I/O buffer.
P2V-B Voltage Input/Output Selection
VIO
3.66Volts
1 2 3
3.50Volts
(Default)
1 2 3
R
P2V-B
3. Voltage Regulator Output Selection (VCORE)
This jumper sets the VCORE voltage supplied to the microprocessor.
P2V-B CPU VCORE Voltage Selection
Test
1 2 3
Normal
(Default)
1 2 3
VCORE
R
P2V-B
III. H/W SETUP
Jumpers
WARNING! Using a higher voltage Test for VCORE or 3.66Volts for VIO may
help when overclocking but may result in the shortening of your computer
component’s life. It is strongly recommended that you leave these jumpers on
their default settings.