Asus U1 - Manual (Page 62)

A
Appendix
Security Setting
1� On the Security screen, select Change Supervisor or
Change User Password.
2� Type in a password
and press [Enter]�
3� Re-type the password
and press [Enter]�
4� Password is then set�
1� Leave the password
field blank and press
[Enter]�
To clear the password:
2� Password is then cleared�
Password Check
Select whether to ask for a password during bootup (Always)
or only when entering the BIOS setup utility (Setup)�
Select the level of access to allow the “User Password” to
have in the BIOS setup utility�
User Access Level
Save Changes
If you want to keep your configuration settings, you must
save changes before exiting the BIOS setup utility�
If you want to restore default settings, choose Load
Manufacture Defaults� You must then save changes to
keep the manufacture default settings�