Asus M2N32-SLI Deluxe - Manual (Page 160)

- Chapter 5: Software support
Configure a CONCATENATION set when using a single Serial ATA drive;
otherwise, the system will not recognize the drive.
Creating a CONCATENATION set
To create a CONCATENATION set:
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE
RAID0
RAID1
SPARE DRIVE
CONCATENATION
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
3. The selection bar moves to the
Physical Drive menu. Using the up
or down arrow keys, select a drive
then press <Enter>
to set a drive for the RAID set.
4. The utility prompts a message to
input the RAID size, use the up or
down arrow keys to set the RAID
size then press <Enter>.
5. Press <Y> to confirm or <N> to return to the Main Menu.
1. From the Silicon Image
configuration utility main
menu, select Create RAID
set then press <Enter>.
2. From the sub-menu
Select CONCATENATION
then press <Enter>.