Asus Eee PC MK90H - Manual (Page 22)

Chapter 2: Getting Started 2-2
Powering on your Disney Netpal
These are only quick instructions for using your Disney Netpal.
1. Install the battery pack
1. Connect the AC power adapter
• When you open the display panel, do not force it down to the table
or else the hinges may break! Never lift the Disney Netpal by the
display panel!
• Only use battery packs and power adapters supplied with this
Disney Netpal or specifically approved by the manufacturer or
retailer for use with this model or else damage may occur to the
Disney Netpal. The output voltage of this adapter is +12Vdc, 3A.
Remember to fully charge the battery before first use and whenever
it is depleted to prolong battery life.
2. Turn ON the Disney Netpal
Damage may occur if you use
a different adapter to power
the Disney Netpal. You may
damage both your battery
pack(s) and the Disney Netpal
with a faulty AC-DC adapter.