Asus A7V600-X - Manual (Page 33)

ASUS A7V600-X Motherboard 1-23
10. Serial ATA connector (7-pin SATA1, SATA2)
These connectors accommodate the primary serial ATA (SATA1) and a
secondary serial ATA (SATA2) cables. Connect the serial ATA cable to this
connector then install to a serial ATA ready hard disk.
A7V600-X
®
A7V600-X SATA Connectors
GND
RSA
T
A_TXP2
RSA
T A_TXN2
GND
RSA
T
A_RXP2
RSA
T A_RXN2
GND
SATA1
GND
RSA
T
A_TXP1
RSA
T A_TXN1
GND
RSA
T
A_RXP1
RSA
T A_RXN1
GND
SATA2
11. System panel connector (20-pin PANEL1)
This connector accommodates several system front panel functions.
A7V600-X
®
A7V600-X System Panel Connectors
* Requires an ATX power supply.
PLED-
Ground
PWR
+5V Speaker
Speaker
Connector
Power LED
Ground
Reset SW
SMI Lead
ExtSMI#
Ground
Reset
Ground Ground
ATX Power
Switch*
PLED+
IDE_LED- IDE_LED+
IDE_LED
• System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• System Warning Speaker Lead (4-pin SPKR)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
The SATA cable is purchased separately.