Nb probe setup – Asus Z92Ne User Manual
Page 80
Advertising
![background image](/manuals/298273/80/background.png)
80
Software
Utilities
1. On the “Welcome” screen, click Next after
confirming this is what you want to setup.
2. On “Choose Destination Location” , click Next
to continue or enter another destination folder.
3. When setup is complete, click OK to exit.
NB Probe Setup
Running setup will give you the following wizard:
NOTE: You cannot run this utility without
first installing “ATK0100”. You will be given
this message if you do not have the driver
installed.
Advertising
This manual is related to the following products: