3 asus ez flash 2 utility, Asus ez flash 2 utility -3 – Asus P5N73-AM User Manual

Page 39

Advertising
background image

ASUS P5N73-AM

2-3

To update the BIOS using EZ Flash 2:
1.

Insert the floppy disk or the USB flash disk that contains the latest BIOS file to the

floppy disk drive or the USB port, then launch EZ Flash 2 in either of these two ways:

•. Press

<Alt> + <F2> during POST to display the following:

2.1.3

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based

utility.

Before you start using this utility, download the latest BIOS file from the ASUS website at

www.asus.com.

ASUSTek EZ Flash 2 BIOS ROM Utility B328

Current ROM

Update ROM

BOARD: P5N73-AM

VER: 0107

DATE: 05/29/2008

BOARD: Unknown

VER: Unknown

DATE: Unknown

PATH: C:\M2NPVOC

A:

C:

[Enter] Select [S] Save [ESC]Exit

[Tab] Switch [Up/Down/Home/End] Move

Note

WIN98SE

<DIR>

NETTERM

<DIR>

DRIVERS

<DIR>

RECYCLED

<DIR>

WUTEMP

<DIR>

NEWFOL~1

<DIR>

FLASH TYPE: MXIC MX25L8005 8Mb SPI

WIN98E

<DIR>

Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and

press <Enter> to enable it.

Press <Tab> to switch between drives until the correct BIOS file is found.

2.

When the correct BIOS file is found, EZ Flash 2 performs the BIOS updating process

and automatically reboots the system when done.

• This function supports devices such as USB flash disks or floppy disks with FAT 32/16

format and single partition only.

DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

Advertising