Configuring a static ip network connection – Asus ET2301IUTH User Manual
Page 53
Advertising
English
5
All-in-One PC ET2301
10. Enter your Username, Password, and Connection
name. Click Connect.
11. Click
Close to finish the configuration.
12. Click the network icon in the taskbar and click the
connection you just created.
13. Enter your user name and password. Click
Connect to
connect to the Internet.
Configuring a static IP network connection
To configure a static IP network connection:
1. Repeat steps 1 to 5 of the previous section
Configuring
a dynamic IP/PPPoE network connection.
2 Click
Use the following IP address.
3. Enter the IP address, Subnet mask and Gateway from
your service provider.
4. If needed, enter the preferred DNS Server address and
alternative address.
5. When done, click
OK.
Advertising
This manual is related to the following products: