Asus SK8V - Manual (Page 131)

ASUS SK8V motherboard 5-21
4. Select Select Disk Drives, then press <Enter>. Use arrow keys to
select disk drive/s, then press <Enter> to mark selected drive. (An
asterisk is placed before a selected drive.)
5. Select Start Create Process and press <Enter> to setup hard disk for
RAID system. The following confirmation message appears:
Press “Y” to confirm or “N” to return to the configuration options.
The data on the selected disks will
be destroyed. Continue? Press Y/N
5.5.4 Delete Array
1. In the VIA RAID BIOS utility main menu, select Delete Array then
press <Enter>. The focus is directed to the list of channel used for IDE
RAID arrays.
2. Press <Enter> to select a RAID array to delete. The following
confirmation message appears.
Press “Y” to confirm or “N” to return to the configuration options.
The selected array will be destroyed.
Are you sure? Continue? Press Y/N
6. Select Start Create Process and press <Enter> to setup hard disk for
RAID system. The following confirmation message appears:
Press “Y” to confirm or “N” to return to the configuration options.
The data on the selected disks will
be destroyed. Continue? Press Y/N
The same confirmation message appears when the Auto Setup for
Data Security option is selected.
The same confirmation message appears when the Auto Setup for
Capacity option is selected.