Asus VN279Q - Manual (Page 18)

2-4 Chapter 2: Setup
•. To.connect.the.VGA/HDMI.(MHL)/DisplayPort.cable:
a. Plug one end of the VGA/HDMI (MHL)/DisplayPort cable to the
monitor’s VGA/HDMI (MHL)/DisplayPort jack.
b. Connect the other end of the VGA/HDMI (MHL)/DisplayPort cable to
your computer or mobile device's VGA/HDMI (MHL)/DisplayPort jack.
c. Tighten the two screws to secure the VGA connector.
•. To.connect.the.audio.cable:.connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
•. To.use.the.earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.6 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.