Asus P7P55 WS SUPERCOMPUTER - Manual (Page 81)

ASUS P7P55 WS Supercomputer 3-17
3.4.4 Intel(R) TurboMode Tech [Enabled]
This item appears only if you set the Ratio CMOS Setting item to [Auto]. Turbo
mode allows processor cores to run faster than marked frequency in specific
condition. Configuration options: [Disabled] [Enabled]
3.4.5 Xtreme Phase Full Power Mode [Auto]
Enable this item to ensure the best CPU O.C. performance.
Configuration options: [Auto] [Enabled]
The following two items appear only when you set the Ai Overclock Tuner item
to [Manual], [D.O.C.P.] or [X.M.P.].
BCLK Frequency [XXX]
Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to
adjust the value. You can also type the desired value using the numeric keypad.
The values range from 80 to 500.
PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. The values range from 100 to 200.
3.4.6 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency.
Configuration options: [Auto] [DDR3�8��MHz] [DDR3�1�66MHz] [DDR3�1333MHz]
[DDR3�16��MHz]
The DRAM Frequency configuration options vary with the BCLK Frequency
item settings.
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
3.4.7 QPI Frequency [Auto]
Configuration options: [Auto] [427�MHz] [48��MHz]
3.4.8 OC Tuner Utility
Press the <ENTER> key to start automatic system overclocking. The OC Tuner
Utility automatically adjust system parameters and reboots several times for the
best overclocking result. DO NOT shut down the power before the auto-adjustment
completes.